French Green Clay comes from the sedimentation of Silico-aluminum, its coloring the result of the oxides contained in these rocks. Its unique composition includes Iron, Silica, Aluminum, Magnesium, Calcium, Titanium, Sodium and Potassium. French Green Clay is prepared for the commercial market by a process of sun-drying and crushing. After the clay has been mined, it is spread in the sun to remove excess water. It is then ground by large hydraulic crushers and micronized, or finely pulverized. The last stage in the process is a final period of sun-drying to remove the last traces of water.

French Green Clay contains a cornucopia of valuable elements, which include montmorillonite, several (up to 9) important mineral oxides, magnesium, calcium, potassium, dolomite, silica, manganese, phosporous, silicon, copper, and selenium. Green clay owes its coloration to two very important factors, which ultimately decide a good quality clay from a poor quality clay. They are, iron oxides, and decomposed plant matter. The natural green tones found in this luxurious clay are from the very cycles of life this earth uses to regenerate itself.

Unlike other clays where key elements work in symbiosis off of each other, French Green contains several elements which act as their own "body". In French Green Clay, each element is responsible for working the outer epidermis (skin) in its own way and in dispensing their biological constituents as best as possible.

Appearance: Light green colored powder.

Benefits: French Green Clay absorbs and removes impurities from the skin, stimulating blood flow to create healthy and glowing skin. When prepared as a mask, the clay dries on the skin causing pores to tighten and the skin to feel firm, toned and refreshed. French Green Clay can be used in poultices to treat arthritis, sore muscles, and sprains; in ready-to-use pastes for application to cuts, bruises, insect bites, stings, and minor burns; and mineral baths for stress relief. It is suitable for all skin types.

Application: French Green Clay can be used in detoxifying body wraps, soap making, face masks, mineral based or cream based cleansers, face or body scrubs, cosmetics and facial powders.

Directions for Use: 5-100% in skin-care products, 1 Tablespoon(15ml) per lb(500g) of soap.

Caution: For external use only. Caution should be exercised as clays may stain fabric.

Simple Face Mask Recipe:
Combine 1 tbsp of clays to 2 tbsp of water to form a paste and apply to the skin. Leave for about 10 minutes and wash off with warm water. Floral water or aloe vera gel juice can be substituted for water.

Poultice Recipe:
Add 3 tbsp of clay to enough water to form a thick paste. Add a few drops of essential oils if desired and apply the paste in a layer about 1/4-in thick to a piece of gauze. The poultice is applied to the injured area with the gauze uppermost and held in place with adhesive tape. It can be left in place as long as two hours, but the clay should not be allowed to dry. Poultices should not be reused but discarded after use.

Botanical Name: Verbascum thapsus
aka: sea clay, illite clay
Origin: France
Notes: Kosher Certified. Non-irradiated
Specifications are subject to change without notice.
* FDA disclaimer